187614 187614 187614 187614 187614 187614

CRYORIG C7 Cu (47mm høy inkl vifte)

600~2500rpm, max 40,5 m³/h, 30 dB(A)

Varenr: 147236
Alt. varenr: CR-C7B
0 stk. på lager i butikk og på nett



C7 Cu

Exceptionally Compact, Copper Enhanced, Extreme Cooling.

The Power of Copper

Copper is a malleable, and ductile metal with very high thermal and electrical conductivity. It’s nearly twice as thermal conductive as aluminum. However, 3 times as costly as aluminum normally making it the choice material for only the most thermal critical components such as heatpipes and heatsink bases.



The Advantages of Copper
15% Better Thermal Performance

Taking advantage of copper’s superior thermal conductivity, the C7 Cu is capable of achieving a additional 15% of thermal performance compared to the standard C7. This is added performance without adding extra size or Fan RPM/CFM/dBA.

Zero Interference Design


Back Side

Fiberglass enhanced plastic backplate is both sturdy and minimal in design, avoiding backside components.

Front Side

Kept in the CPU Keep Out Zone, means zero problems with front side RAM slots or components.

Back Side (optional)

In case of added backside components, the backplate can be replaced by the included washers to avoid interference.

Made for Small Form Factor ITX
Max Size to Performance Ratio

The C7 Cu is made to solve heatsink size limitations in SFF/ITX systems, unleash your CPU! With a total height of 47mm including heatsink and fan, the C7 Cu is in the same height range of stock heatsinks. Meaning the C7 Cu can fit and go into any system that is compatible with CPU stock coolers.

Extra Air
in Tight Spaces
With Quad Air Intake

In most SFF/ITX systems there’s limited space between the top of the heatsink and the case panel limiting fan front air intake. CRYORIG’s patent Quad Air Intake, adds four aero dynamic intakes in the corners of the fan pulling extra airflow from the sides of the fan.

Nullify Vibrations With
Built In Acoustic Absorbers

Included with every C7 Cu fan are four pre-installed integrated Acoustic Absorbers. These thick silicon pads form a buffer between the fan and heatsink body, nullifying unwanted vibration noise.


Specification & Details

Heatsink Specification
Dimension ( with fan )L97 mm x W97 mm x H47 mm
Weight ( with fan )675 g
Weight ( without fan )613 g
Heat pipes6mm heatpipe x 4 units
FinT = 0.4 mm ; Gap = 1.2 mm
Fin Pcs57 pcs
Copper BaseC1100 Pure copper nickel plated
RAM Height LimitLimitless
TDP115 W
Fan Specification
DimensionL92 mm x W92 mm x H15 mm
Weight62 g
Rated Speed600 ~ 2500 RPM ±10 %
Noise Level30 dBA
Air Flow40.5 CFM
Air Pressure2.8 mmH2O
Ampere0.2 A
Motherboard Compatibility
1150, 1151, 1155, 1156, 1200
FM1, FM2/+, AM2/+, AM3/+, AM4
What's In The Box
C7 Cu x 1
X-Bar™ Backplate x 1
Hex Nut x 4
Washer x 4
CRYO-Paste CP7 x 1
Screwdriver x 1
Installation Guide x 1
Product Registration Card x 1


For mer info, se http://www.cryorig.com/c7cu.php


Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.