The EK-Quantum Reflection² V3000 Plus D5
PWM D-RGB – Plexi is a custom water-cooling reservoir, routing, and
pump solution. This distribution plate is tailored explicitly for the
LIAN LI V3000 Plus chassis. Equipped with the latest 3rd generation
SATA-powered D5 pump, it eliminates the need for additional 4-pin Molex
cables, following the latest PC industry trend. As part of the
Reflection² series, these distribution plates are EK-Matrix7 compliant,
ensuring seamless compatibility and ease of installation.
This cutting-edge design includes a
pump, reservoir, straightforward mounting mechanism, and multiple
industry standard G1/4? threaded inlets and outlets. We strategically
positioned these inlets and outlets to align perfectly with other EK
products, reducing the bends required when setting up your loop.
Crafted to be elegantly mounted on the
case side, next to your motherboard, the EK-Quantum Reflection² V3000
Plus D5 PWM D-RGB seamlessly integrates with the LIAN LI V3000 Plus
chassis.
With the installed distro plate, the maximum radiator size is the following:
- Top: EK-Quantum Surface P480
- Bottom: EK-Quantum Surface P480
- Side: EK-Quantum Surface S480
A sleek addressable D-RGB LED strip runs
the entire length of the unit, while an anodized black aluminum cover
conceals any unwanted LED hotspots. The built-in addressable LED strip
connects effortlessly to your motherboard's 5V header or a dedicated
D-RGB controller. It also offers compatibility with popular software
such as MSI MYSTIC LIGHT SYNC, ASROCK POLYCHROME SYNC, ASUS AURA SYNC,
and GIGABYTE RGB FUSION 2, ensuring a cohesive and synchronized lighting
effect. With a total of 32 LEDs, this product guarantees stunning
illumination.
PWM-controlled D5 pump - G3
This water distribution plate comes with
a powerful yet silent PWM-controlled D5 pump. The goal was to make a
product with enough power to offer excellent reliability and outstanding
performance with multiple blocks and radiators while keeping the noise
down to a minimum. The D5 pump has been updated with the latest G3
(Generation 3) variant. It comes with a SATA power connector, following
the latest PC industry trend of a decreased use of 4-pin Molex cables.
EK-Matrix7 Support
Matrix7 standardizes the products’
dimensions, including the port position and spacing, making liquid
cooling loop assembly more intuitive and easier than ever. EK-Quantum
Reflection² distro-plates follow the EK-Matrix7 standard, enabling them
to seamlessly integrate with the Vector² GPU water blocks and active
backplates and Quantum Surface radiators. This means you’ll spend less
time planning the loop and bending tubes, while the end result will
still be an epic build.
Reservoir:
- Dimensions with the attached pump (W x D x H): 157,5 x 29,5 x 555mm
- Reservoir volume: ~550ml
- D-RGB LED count: 32
- D-RGB cable length: 500mm
- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)
Pump Motor Technical Specifications:
- Motor: electronically commuted spherical motor
- Rated voltage: 12V DC
- Power consumption: 23W
- Maximum pressure head: 3.9m
- Maximum flow: 1500L/h
- Maximum system temperature: 60°C
- Materials: Stainless Steel, PPS-GF40, EPDM O-rings, Aluminum Oxide, Hard Coal
- Power connector: SATA and 4-pin PWM FAN connector
Operational Regime:
- PWM duty cycle: ~ 20-100%
- Default behavior: runs at 100% duty cycle when no PWM feedback signal is present
Enclosed:
- EK-Quantum Reflection² V3000 Plus D5 PWM D-RGB – Plexi
- Necessary mounting screws