This is a White Edition of the EK-Quantum Vector² GPU water blocks for the ROG Strix and ASUS TUF RTX 4090 GPUs. It features an all-new white terminal and a white stand-out piece.
High-Performance GPU Cooling
The new Vector² water blocks
effortlessly solve the issue of excessive heat generation during high
load on the GPU core, voltage regulation module, and the GDDR6X VRAM of
the ROG Strix and ASUS TUF RTX 4090 Graphic cards.
Backplate Included
The package now contains:
- A high-performance GPU water block of the latest generation
- Premium quality CNC-machined backplate
- Mounting mechanism
- Thermal Grizzly Hydronaut thermal paste
- Thermal pads
- Custom-made Dual-Slot GPU Bracket
- GPU and PCI power cable release tool
A black, full-coverage backplate is included with the
GPU water block. Its distinctive L-shaped profile encloses the entire
GPU while, at the same time, increasing the cooling surface area. The
backplate also comes with pre-installed captive backplate screws that
simplify the installation. They ensure that the correct size screw is
always used where it is needed.
Technical and Visual Master Piece
The look of the next-gen water blocks is
dominated by minimalistic straight lines. A 10mm thick copper cold
plate is used for all Vector² GPU water blocks. For Plexi versions,
D-RGB Lighting is now deployed on the longest edge of the water block
for improved fidelity and brightness from every viewing angle. The LED
PCB is concealed inside a clean aluminum extrusion.
EK-Matrix7 Support - For Easier Loop Assembly and Straight Lines
Matrix7 standardizes the dimensions of
the products, including the port position and spacing, making liquid
cooling loop assembly more intuitive and easier. EK-Quantum Vector² GPU
cooling enclosures follow the EK-Matrix7 standard, making them
seamlessly integrate with EK-Quantum Reflection² distribution plates.
This brings compatibility with the EK vertical GPU mount l perfect
alignment of ports in both horizontal and vertical positions, meaning
less time used for planning of the loop, bending tubes, and the end
result will still be an epic build.
EK-Quantum Vector² Strix/TUF RTX 4090 D-RGB - White Edition
The EK-Quantum Vector² Strix/TUF RTX 4090 D-RGB - White Edition GPU water block + backplate set is compatible with:
- ROG Strix and ASUS TUF GeForce RTX 4090
For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.
New Cooling Engine - For Best Cooling In Every Scenario
The Vector water block actively cools
the GPU, VRAM, power stages, and passively the PCB hotspots that are
found on the backside of the GPU core, VRAM, and the VRM (voltage
regulation module) through the backplate.
The implemented Vector² cooling engine
uses a novel 3D machined acrylic insert to improve flow distribution and
thermal performance. This new cooling engine is based on an Open
Split-Flow design, but the asymmetric shape of the jet insert helps
distribute an even flow between the first and last copper fins. The fin
structure geometry has been optimized to provide even flow distribution
with minimal losses and optimal performances even when used in reversed
water flow scenarios. It is also characterized by low hydraulic flow
restriction, meaning it can be used with weaker water pumps or pumps
running on low-speed settings and still achieve top performance.
Great care was taken to achieve a
symmetrical flow domain by utilizing an internal bridge to secondary
components. This was done to ensure the cooling of secondary components
without sacrificing flow distribution over the GPU core.
Premium Materials and Clever Engineering for Longevity and Top Performance
All Vector² GPU water blocks use a thick
10mm copper coldplate with a white acetal terminal attached directly to
it to create a robust assembly. A single o-ring design is used to
create a seal between the cold plate and the water block top, reducing
the number of failure points. This also means that you have seen the end
of stainless steel bridge plates that
were utilized on GPU water blocks before. This simple construction
provides confidence during customization and maintenance. Tactile
magnetic covers are used to conceal the terminal screws, which allows
rotation of the branding when the GPU is inverted in the case.
The cold plate is CNC-machined out of
high-quality, pure electrolytic copper which is
then nickel-plated, while its top is CNC-machined out of glass-like cast
acrylic with a white acetal stand out. The black anodized backplate has
a new L-shaped profile that touches the base of the water block and
encloses the entire GPU while increasing the cooling surface leading to
even better performance.
Included Backplate
For the first time, captive backplate
screws are added to the backplate. They simplify installation, ensuring
the correct length is always used where it is needed to avoid any user
error or second-guessing.
The backplate improves the overall aesthetics of your graphics cards
and also provides additional passive cooling for the backside of the
printed circuit board VRM, core, and VRAM sections.
Rotatable Magnetic Covers
Sleek magnetic covers are used to
conceal the terminal screws, which allows rotation of the branding when
the GPU water block and active backplate enclosure are inverted in the
case or being used on a vertical GPU mount.
Addressable D-RGB Compatibility
Addressable D-RGB LED lighting is
deployed on the longest edge of the water block for improved uniformity
and brightness. The PCB and diodes are concealed inside a clean aluminum
extrusion. The individually addressable RGB LED is compatible with
popular RGB sync technologies from all major motherboard manufacturers.
The arrow marking on the 3-pin D-RGB LED connector is to be aligned with
the +5V marking on the D-RGB (addressable) header (Pinout: +5V | Data |
Blocked | Ground).
Vector² Water Blocks Won an iF Design Award
EK’s premium water blocks from the Quantum Vector² product line boasts an iF Design Awards for 2022.
These prestigious awards signify top-tier design levels delivered by
our products to both consumers and the design community. Not only do
Vector² water blocks have aesthetically pleasing looks to deserve these
awards, but they also bring patent-pending technologies and valuable
features to the table.
Technical Specification:
- Dimensions (L x H x W): : 260 x 153 x 27mm
- D-RGB LED count: 12
- D-RGB cable length: 50cm
- D-RGB connector 3-pin 5V digital LED header (Pinout: +5V | Data | Blocked | Ground)
Made in Slovenia - Europe!