Kingston FURY KF560C36BBEAK2-32 is a kit of two 2G x 64-bit (16GB)
DDR5-6000 CL36 SDRAM (Synchronous DRAM) 1Rx8 memory modules, based on eight 2G
x 8-bit FBGA components per module.
Each module kit supports AMD® EXPO v1.0 and Intel® Extreme
Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB.
Each module has been tested to run at DDR5-6000 at a low
latency timing of 36-38-38 at 1.35V.
The SPDs are programmed to JEDEC standard latency DDR5-4800
timing of 40-39-39 at 1.1V.
Each 288-pin DIMM uses
gold contact fingers.
The JEDEC standard electrical
and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
• EXPO Profile #0: DDR5-6000 CL36-38-38 @1.35V
• EXPO Profile #1: DDR5-5600 CL36-38-38 @1.25V
• XMP Profile #1: DDR5-6000 CL36-38-38 @1.35V
• XMP Profile #2: DDR5-5600 CL36-38-38 @1.25V
CL(IDD)
|
40 cycles
|
Row Cycle
Time (tRCmin)
|
48ns(min.)
|
Refresh to
Active/Refresh Command Time (tRFCmin)
|
295ns(min.)
|
Row Active
Time (tRASmin)
|
32ns(min.)
|
UL Rating
|
94 V - 0
|
Operating Temperature
|
0C to +85C
|
Storage Temperature
|
-55C to +100
C
|
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.66” (42.23mm), w/heatsink