132362
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.

 Handlevogn

Handlevognen er tom.
 


Nyhetsmail

Motta nyheter per epost.

3.3V 800mA Linear Voltage Regulator

LD1117-3.3 TO-220

Oslo
7
Varenr:
137032
Lev.Produktnr.:
 
Netto: 28,-
 ink. mva.

Netto: 22,-   eks. mva.

Kjøp

137032   3.3V 800mA Linear Voltage Regulator LD1117-3.3 TO-220
137032   3.3V 800mA Linear Voltage Regulator LD1117-3.3 TO-220 137032   3.3V 800mA Linear Voltage Regulator LD1117-3.3 TO-220
137032   3.3V 800mA Linear Voltage Regulator LD1117-3.3 TO-220
137032   3.3V 800mA Linear Voltage Regulator LD1117-3.3 TO-220 137032   3.3V 800mA Linear Voltage Regulator LD1117-3.3 TO-220

Lenker: Produkt | Produsent | Support

DESCRIPTION

Ah the esteemed LD1117, who amongst us has not used this popular low drop voltage regulator? This big chunky regulator will help you get your 4-15V battery or wall adapter down to a nice clean 3.3V with 1% regulation. Perfect for just about all electronics!  This is the TO-220 version, with up to 800mA current capability, and has internal current limiting + thermal shut-down protection which makes it sturdy and pretty much indestructible - at least electronics-wise (we're pretty sure a hammer might work...)

This regulator has a ~1V linear drop-out, better than the 780X series' 2V. That means you must give it at least 4.3V to get a clean 3.3V out. This regulator is often used to get a 5V power supply to a a clean 3.3V. There is a constant 'quiescent' current draw of 5mA.

This regulator can provide up to 800 mA as long as it has proper heat-sinking. The higher your input voltage and output current, the more heat it will generate. Without an extra heatsink, you can burn off up to 2W.  We like this calculator for determining your heat sink requirements It's a TO-220 package, so use 62.5°C/Watt junction thermal resistance. The wattage of your set up is = (InputVoltage - 3.3V) *AverageCurrentInAmps. E.g. a 9V power plug and 0.5 Amp of average output current means the regulator is burning off (9 - 3.3)*0.5 = 2.85 Watts! This setup would need a heat sink Or you could use a 5V power supply for (5-3.3)*0.5 = 0.85W which would not require a heatsink.

This regulator requires at least 10uF electrolytic capacitors on both input and output for stability

 

TECHNICAL DETAILS

  • Datasheet
  • Dimensions: 29mm x 10mm x 4mm / 1.1" x 0.4" x 0.2"
  • Pin Length: 13mm / 0.5"


Copyright © 2017 Digital Impuls Oslo AS - All rights reserved
Forretningssystem og netthandel er levert av MultiCase™ Norge AS

(3.17.8.59)